Home » Reviews » Best Wet Look Paver Sealer to Buy in 2022

Best Wet Look Paver Sealer to Buy in 2022

A paver sealer can complete a new patio or spruce up an older one. It may strengthen the joints between pavers to hold them in place while also providing a long-lasting and appealing finish. They provide your lawn with the high-quality appearance and design required to stand out in the crowd. Paver sealant is an essential tool for maintaining the beauty of paver patios, walks, driveways, and pool decks.

Paver sealer should be used sparingly since “too much of a good thing” may lead to a haze, and you should be careful not to overdo it. That is why we’ve put together a list of the top pavement sealer products currently available. There are several advantages to each of these products that you should examine. The easiest way to figure out which Paver Sealer option is ideal and the best for you is to go through this whole list.

Armour AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer

Foundation Armor’s Armor AR350 is a solvent-based sealer that is easy to apply. For concrete and other smooth, non-porous surfaces, it’s the best. A water-based sealant works better if your pavers are set with joint sand. The sand won’t be hardened as much as if you use this method. The finish will not be yellowed by the solvent used here.

On the other hand, you’ll get a glossy, wet-looking surface on smooth pavers that are easy to clean. To get a sheenier finish, apply it to a character with some roughness. The application of this sealant is a breeze. There is no need to use any primer here, regardless of whether or not the surface you’re working on has been sealed. Use it using a roller or sprayer, and then let it dry completely before moving on. Low VOC content and non-recycled resins are used in its construction. A few days are needed for the fumes to disperse, but it’s not too bad. Keep the doors and windows closed if you’re using them near your home’s driveway.

  • UV-stable, so it won’t become yellow in the sun, making it easy to apply
  • Resists salt, wetness, and abrasions in saltwater
  • When wet, the surfaces will be slick and unpleasant to walk on.

Armour WL550 Matte Wet Look Enhancer Sealer Concrete, Brick, Pavers, Stone, and Slate

Armour WL550 darkens all sorts of surfaces and adds a distinctive, ethereal wet effect. You may safeguard your pavements while also enhancing their aesthetic attractiveness by using this option. The solution penetrates the surface of your pavers or concrete to protect them from water damage. As a result, the product does not leave a film on the pavement. In any case, the pavers will seem darker and more wet-like after you’ve applied a sealer. It will take between five and seven years to require a re-application project.

  • Waterproofing is excellent with the wet appearance of solvent-based silicone paver sealant.
  • It gives surfaces a matte, damp look and feel.
  • The surfaces are free of any coating or residue.
  • The long-lasting formula may endure for five to seven years.
  • VOC emission levels are low
  • The chemical has a distinct smell when applied, but it quickly goes away.

EnduraSeal 100% Acrylic “Wet Look” Semi Gloss Concrete Sealer Solvent Base.

Wet look concrete paver sealer that is also 100 per cent pure acrylic is available here if you’re looking for excellent performance and pure acrylic. Coloured, stained and imprinted concrete pavements are especially well suited to this product. It takes 1-2 years to get a semi-gloss finish, depending on the amount of traffic in the area. It’s essential to use a roller to apply two coats of paint and let the area cure for 48 hours before moving on. When used on terrazzo pavements, this wet look paver sealer gives a freshly sealed and well-maintained appearance while renewing and enhancing surface colours.

  • Paver sealer with a wet appearance, suitable for all kinds of concrete and paver surfaces
  • A glossy, non-slippery wet finish is provided.
  • Paver’s joints are sealed and stabilized with this formula.
  • Paver sealer with a wet appearance that is long-lasting.
  • The product darkens and enhances the natural tones of pavements.
  • The wet appearance paver sealer has a strong epoxy scent that lasts until the sealer dries.

DOMINATOR SG+ High Gloss Paver Sealer and Decorative Concrete Sealer

In this round, we’re looking at Dominator. In contrast, the Dominator brand is geared at professional contractors who require something more industrial than commercial, while the Black Diamond brand is geared toward the general public.

If you’ve got the know-how, though, you may utilize it as an excellent product for your home improvement project! However, you’ll have to pay a premium price compared to other sealers for your pavers.

You get more than the fair value for your money since the product is far ahead in quality yet just modestly more costly than its price competitors. Now let’s look at the positives and negatives.

  • The Dominator paver sealer is a good choice in terms of professional usage.
  • It’s easy to use, and there’s nothing special about it compared to other water-based sealers.
  • Unlike other paver sealant products, this one doesn’t emit any noxious aromas or fumes.
  • It is new sealer composition that is low-VOC.
  • It’s the most costly water-based paver sealer.

EnduraSeal Acrylic “Wet Look” Semi-Gloss Sealer (WB)

For those looking for a high-performance sealer with a wet appearance that is 100% pure acrylic, this is the product for you. Coloured, stained, and stamped concrete are some of the best applications for this product.

For 1-2 years following application, the semi-gloss finish will remain depending on traffic. We must include this concrete paver sealer wet look in our evaluation since it seals and stabilizes the seams between the pavers.

It’s essential to use a roller to apply two coats of paint and let the area cure for 48 hours before moving on. Enhances the appearance of terrazzo pavement by renewing and improving its colours with this wet look paver sealant.


  • Paver sealer with a wet appearance, suitable for all kinds of concrete and pavers surfaces
  • Excellent, non-slippery, shiny finish even when wet
  • This product seals and stabilizes the joints between pavers.
  • Durable pavement sealant with a wet appearance for pavers
  • It darkens and highlights its inherent colour tones when applied to a surface.
  • Utilization is a breeze.


  • After the wet-look paver sealer has dried, it has a distinct epoxy scent.

High-Gloss, Cure & Seal, Concrete Sealer (5 Gal) Stampsheen | Ultimate Wet Look for Concrete and Pavers

Stampsheen’s properties are made possible by its unique blend of 25 per cent solids, solvent-based acrylic resin, and UV-resistant, anti-spill properties. Once the surface has been cleaned, you may apply this “cure and seal” sealer right away. It brings out all the fine details and vibrant colours in your Tru Impressions stamping project. ‘This is the finest all-around sealant for outdoor concrete. It may be used on your driveway, patio, pool deck, garden seats, and firepits, among other places. As the sun and weather (and driving on it for a driveway) wear it down, you’ll need to reapply a Solvent Based Acrylic sealer, and it’s simple to do so using this sealant! As time goes on, solvents will penetrate the sealer and re-emulsify it, allowing the new sealer layer to mingle with the old one, producing a whole unique sealer appearance. When applied to a surface, it restores colour and brings out all the small details. A gallon of Stampsheen covers over 1000 square feet. Transparent and shiny are the results.


  • Durable against all forms of harm.
  • It won’t turn yellow over time.
  • You can clean after the day of using this product.


  • None

Techniseal JSW | Paver Joint Stabilizer | Wet Look Finish

While improving the colour of pavers, this Joint Stabilizing Protector is meant to inhibit aggregate movement (permeable paver joints) or sand movement (traditional paver joints). Chemical products such as de-icing salts, which may cause erosion and degradation, cannot penetrate the aggregates, but they resist acids and alkalis. Its translucent covering is microporous, preventing impurities from penetrating the pavers and making it easier to maintain them. There are no noxious odours from this product, and it is safe for the environment. The colour of the paver will be enhanced organically. As well as taking care of sand aggregates, Techniseal may help stabilize joints. Microporous and water-based, it is ideal for permeable systems. As a result of its unique construction, aggregates or sand cannot travel through the structure. It will also brighten the colour of the pavers. Also, chemical compounds that cause degradation or erosion are avoided by it. Resistance to acids and alkalis makes it ideal for food and beverages.


  • There are no toxic scents produced.
  • Stops contaminate from getting in.
  • It enhances the colour of the hair and skin.


  • If care isn’t taken, bubbles may form.

Precautions to Take Before Buying Paver Sealer

Choosing a suitable paver sealer may be a challenging undertaking. A variety of variables must be taken into account before you can narrow your search. While certain sealers perform well on particular surfaces, others don’t provide the same amount of protection on others. When choosing a sealer for your paving stones, these are some of the things you should consider.


A paver sealer that can resist heavy foot activity after treatment is the best on the market. There should be no need for reapplying the sealant to the pavers once they have been coated. Inexpensive solutions can lose their strength with time, while high-quality options endure for years.

Application process

Using a professional may cost you money, but completing the task yourself can save you money and turn out to be an intriguing project because of its simplicity. It’s best to go for a product that can be applied with a paintbrush, roller, spray, or so on since other brands may be a bit more challenging to work with it.

Street Repairs on Cobblestones

Some paver sealers are more challenging to remove and maintain than others. As a result of their sticky nature, these products may make a big mess when applied and for a while after that. Once the application has been completed, you must choose a simple product to clean up.


Buying a product that can be utilized on several surfaces is always a good idea. For example, you may seal your driveway and then apply the same sealer to other stone or concrete surfaces once you’ve finished. You won’t have to buy a variety of paver sealers for your home if you utilize this method.

Why should you get the Best Paver Sealer?

You can extend the life of your deck, driveway, poolside and other stonework surfaces by applying the sealant on paver stones. In addition, there are other benefits to having one of the top paver sealers, such as the following:

  • For a home’s curb appeal, a high gloss or matte finish to paved surfaces may be achieved by using one of the top sellers on the market.
  • Some paver stones may grow dull or damaged over time due to the weather. Sealers are be applied to the surface to prevent stains, fading, or high-traffic wear and tear from damaging paver stones.
  • It is possible to prolong the life of your paver stones by using sealers, which make them more resistant to wear and tear, removing the need to replace them constantly.

Wrapping up!

The most refined paver sealers on the market are now after our evaluation. High gloss or matte finishes are available in both solvent and water-based options.

It doesn’t matter whatever sealer you choose; your pavers will look fabulous for longer. A little effort can provide fantastic benefits. We hope you get the optimized result of your investment!